Everbuild secondelijm hoge viscositeit 50g

Merk Everbuild Productcode: 10893 Verkoopeenheid: Stuk

€ 3,88 Excl. btw € 3,21 Prijs per eenheid € 0,08/g
Geselecteerd
Aantal
Controleer de voorraad in jouw vestiging

Productomschrijving

• Ethyl cyanoacrylate lijm met een hoge viscositeit (traagvloeibaarheid).

Technische specificaties
EAN 5029347601089
Gevarencode H315-Veroorzaakt huidirritatie. H319-Veroorzaakt ernstige oogirritatie. H335-Kan irritatie van de luchtwegen veroorzaken. P261-Inademing van stof/rook/gas/nevel/damp/spuitnevel vermijden. P305+P351+P338-BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen. P302+P352-BIJ CONTACT MET DE HUID: met veel water en zeep wassen. P501-Inhoud/ verpakking afvoeren overeenkomstig de nationale voorschriften. P403 + P233P501-Inhoud/ verpakking afvoeren overeenkomstig de nationale voorschriften. EUH202-Cyanoacrylaat. Gevaarlijk. Kleeft binnen enkele seconden aan huid en oogleden. Buiten het bereik van kinderen houden.
Merk Everbuild
Fabrikant ID HV50
Veiligheidsinformatieblad Klik hier
Beoordelingen
Everbuild secondelijm hoge viscositeit 50g heeft als beoordeling 4.6 van de 5 door 193.
Rated 3 van de 5 door uit Good stuff but..... Bought this to carry out major large scale modelling works. I have used such glues for such huge scale works for years. Firts time i have used this brand. Extremely good value..good quantity and it works. Takes a little longer than some brands....hey we are talking seconds. However the bottle consistantly solidified. I always clean the nozzle...but it swiftly dried within. It meant that i constantly had to put a wire through it. I've actually had to start cutting the nozzle down to use it. I know rhat it will get to a stage when i have no control due to the size of the hole. So....good product....budget price....nozzle not so great
Datum plaatsing: 2017-08-08
Rated 5 van de 5 door uit Awesome stuff, works way better than other brands Awesome super glue, used this to bond some polyurethane resin together that had split (about 10mmx5mm in a couple of places). Used in conjunction with the debonder to remove a previous attempt with another brand. not overly viscous and thick, so trickles and runs into space to be glued just about right (for my purposes anyways). I would say you have about up to a minute rather than 30 seconds before it starts to go off but results may vary. Would recommend to others, and Toolstation is the cheapest supplier from what I've seen, at time of posting. Cheers!
Datum plaatsing: 2020-05-17
Rated 5 van de 5 door uit Thick CA Very good This is the best value CA superglue anywhere. This is the thick CA which has some gap filling abilities. I am an RC Aero modeller and it's way cheaper than hobby store CA.
Datum plaatsing: 2021-07-21
Rated 5 van de 5 door uit Cheap & Sticky Used this to glue wood to wood, metal to wood, metal to plastic, wood to plastic, plastic to plastic, metal to metal, wood to glass, and my fingers to all of the above. It's insanely useful. One of my favourite uses is in wood joints along with PVA wood glue to get a quick instant bond before the wood glue has dried. Also great in small craft projects where PVA is too slow and messy. Fantastic value for such a big bottle, works exactly the same as expensive brands.
Datum plaatsing: 2020-02-06
Rated 5 van de 5 door uit Glue to stick rocks in a reef tank Got these to glue rocks together in a reef tank, works perfect. Quick drying time too
Datum plaatsing: 2020-06-07
Rated 5 van de 5 door uit Cyanoacrylate as good as expensive brands To my mind this adhesive is absolutely indistinguishable from expensive brands that are sold in much smaller amounts and clog at least as badly. Unexpectedly I've found that the container is not particularly prone to clogging, which allowed me to use the last bottle that I had many times over several months, to the last drop, with scarcely an issue until the last mL or two.
Datum plaatsing: 2020-06-22
Rated 5 van de 5 door uit Extremely good value and sticks to PLA This is really good CA, especially when used with the activator spray. The bottles have got over 3x more than similar products on the market at greater cost. I've used it when 3D printing with PLA filament and despite comments on the internet about nothing sticks to PLA very well, this stuff does.
Datum plaatsing: 2019-02-20
Rated 5 van de 5 door uit Very useful product - better than normal superglue I use this product for joining awkward joints and particularly plastics. The great thing is that its not instant grab - it has to be held for 30 sec but this allows a repositioning which is helpful. Bottle doesn't dry up either.
Datum plaatsing: 2019-04-29
  • y_2021, m_7, d_22, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_49, tr_144
  • loc_nl_NL, sid_10893, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_toolstation-nl
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 24.44ms
  • REVIEWS, PRODUCT

Gerelateerde producten